Mavic 3 Multispectral
£3,500.00 ex Vat
RGB and Multispectral Imaging System
Mavic 3 Multispectral – also known as Mavic 3M – uses a two-in-one camera system to view and collect a wide array of information that users can turn into results on the field. An RGB camera is equipped with a 4/3-inch CMOS and 20MP image sensor and mechanical shutter with a maximum speed of 1/2000. It manages high-speed continuous imaging at the fastest interval of 0.7 seconds and can quickly collect image information, greatly improving the efficiency of operations over the fields.
In addition to the RGB camera, a four-lens multispectral camera provides more accurate directional information, helping users gain a deeper understanding of crop conditions by sensing details that the human eye cannot detect. Each of the four multispectral cameras of can capture 5 million pixels and scan for the following wavelengths:
- Green (G): 560nm ± 16nm
- Red (R): 650 nm ± 20 nm
- Red edge (RE): 730 nm ± 20 nm
- Near-infrared (NIR) 860 nm ± 26 nm
These can be used to generate advanced crop index measurements such as NDVI, CVI and more.
The Mavic 3M has an optional RTK module that achieves centimeter-level positioning. The drone, its camera, and the RTK module are synchronized at the microsecond level to accurately obtain the position information of the imaging center of each camera. This allows Mavic 3M to perform high-precision aerial surveying without the use of ground control points. And with a battery life of up to 43 minutes, Mavic 3M can complete the surveying and mapping operations of an area as vast as 2 square kilometers in a single flight.
In the box:
- M3M Drone
- RC Pro controller with screen
- 100W fast charger
- Peli-style hard case
- Battery set (3 extra batteries plus multi charger)
- RTK Antenna (use for cm-level positioning with network RTK)
- DRTK2 base station (use for on-site RTK positioning – no network needed)
Please ask for a quote with these!